Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

262c bertone sway bars? compatable? 200

I do not think the sway bars are any better than the sway bars on the stock 240's. The ones on my 79 262C & 264GL look about the same when compared to the stock sway at the boneyards but I could be wrong. Come to think of it I think I did hear somewhere that the 260 sways were a bit thicker, but not by much.

As far as the springs go the 260's front springs are a little stiffer then the stock 240's but not as stiff as the DIESEL springs. I believe that one of the regular posters has upgraded to 260 springs so you might want to get some info from him/her. I believe that the person that has done the upgrade has that on their signature. I'm sure the 260 springs will give you a firmer ride when compared to the 240 stock springs. I must say that both of the 260's I drive have a nice, responsive, and comfortable ride. Good Luck!

Sincerely,
--
Julio Meza

1979 264GL B27F 124K --> BW55->M46, CLS, IPD Sway, 81+ Dash, Gauges

1979 262C B27F 159K --> Restore Project w/Possible V8

1984 245DL 212K -->Wifemobile






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 262c bertone sway bars? compatable? [200]
posted by  cbremski subscriber  on Tue May 4 15:03 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.