Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2014 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1966 122s Brake Puller 120-130

posted by  walrus3 on  Thu Feb 3 05:26 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

I fabricated a puller several years ago more or less based on a simplified
version of the one shown in the 122 manual.
Here are some pix out of the gallery:



The above pic shows the puller in place with the inside end against
the end of the axle.



This one shows the lug bolts tightened down to push the axle through the
brake drum.



Here's what the inside looks like.



You could fabricate one of these fairly easily out of some
3/8" steel plate and a short piece of pipe. The length is
fairly critical but can be adjusted by spacers if too long.
(No help if too short!)
--
George Downs Bartlesville, Heart of the USA!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1966 122s Brake Puller [120-130]
posted by  EMH  on Thu Feb 3 02:06 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.