Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

power window problem (2nd try) 200 1992

posted by  Vespa 59 on  Wed Mar 2 17:39 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

If theres a problem with the motor, (slow, locked-up, etc) it will try to pull alot of current and drop the voltage down to 10v or lower. How much voltage do you have at the motor with the wires disconnected? If you have low voltage with the wires disconnected then you have a problem with the wiring or pwindow relay. Check the relay located behind the center console just behind the coin tray. Usually burned/oxidized contacts will supply some voltage (10.6v) but not enough current to power the window. Good Luck






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New power window problem (2nd try) [200][1992]
posted by  wheelman  on Wed Mar 2 15:31 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.