Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

O2 sensor replacement 200 1984

uid 17340's pic
posted by  Nickvjr on  Fri Mar 4 07:59 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 4 11:15 CST 2014
[RELATED]

You could purchase a O2 Sensor Socket from your nearest auto parts store to make removal & installation easier. This socket is like your standard 3/8" deep socket with a slit down one side so the sensor wire can come out and not be in the way / pinched. I have one of the O2 Sensor Sockets and it make installation a breeze.

If you have enough room you can just use some PB Plaster and a open-end wrench to get the old one out. The new one should be installed finger-tight with a final 1/2-3/4 turn by the open-end wrench. Good Luck!

Sincerely,
--
Julio Meza

1979 264GL B27F 127K --> BW55->M46, CLS, IPD Sway, 81+ Dash, Gauges, Flat Hood & E-Codes

1979 262C B27F 163K --> Restoration Project

1984 245DL 216K --> Sport Wagon

2002 Mercedes C320S 33K --> Wifemobile






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New O2 sensor replacement [200][1984]
posted by  cguin  on Fri Mar 4 07:38 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.