Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

automatic shifter bushing done today, my experience 700 1990

posted by  Maui on  Thu Mar 24 12:14 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi Ken,

I also replaced all 3 of my shifter bushings in my recently acquired
740 sedan.

There was not a shread of evidence of old bushings just loose and sloppy
linkages. I am in Hawaii so there was no corrosion to deal with making the
installation quite easy ~ 30 minutes total.

The FAQ's were invaluable in diagnosing the problem and in the simple repair.
I even had photos printed for reference. I would consider this a very easy DIY job
but didn't have to deal with the cold or corroded parts.

Bought the bushings from FCP for a couple of bucks and what a difference.

Good to know you also had success.

Maui






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New automatic shifter bushing done today, my experience [700][1990]
posted by  invar  on Thu Mar 24 11:04 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.