Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2018 V70-XC70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

1998 V70 DRIVER DOOR LOCK help V70-XC70 1998

Hi brick owners,

Need help. Today the driver door lock acted up. It is difficult to rotate the cylinder to open the lock. As it turned out, the "rod" (the little thing that goes up and down when lock and unlock) is visibly leaning backward.

I suspect the rod assembly came loose (screws loosend). When looking from outside, the rod is leaning backward about 15 degrees (like the Pisa tower in Italy).

Anyone experienced this problem before?
Procedure to remove door panel would be useful, please help.

cn
1998 V70 70Kmiles








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    1998 V70 DRIVER DOOR LOCK help V70-XC70 1998

    Check the Volvospeed site for door panel removal. It's shown on an 850, but the V70 is very similar. My advice: don't try to repair the door lock module. It's a nightmare. Just replace the whole thing. About US$100.

    I just did the same replacement on my car. Here's the link to my thread:

    http://www.volvospeed.com/Repair/v70latch1.php

    Matthew








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    1998 V70 DRIVER DOOR LOCK help V70-XC70 1998

    I thought I had replied to your cry for help. This site tells you how to remove the door panel:
    http://www.volvospeed.com/Repair/doorremove.php

    Klaus
    --
    (V♂LV♂s 1975 164, 1995 854T, 1998 V70R)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.