Volvo AWD V70-XC70 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2001 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ANSWER Brake Scrape While Turning V70-XC70 1999

posted by  KlausC on  Tue Feb 5 06:00 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

If the scraping is in the rear, then it is due to the brake shoes touching the drum. Mine did the same thing because the positioning pins were bent and the shoes were not seated properly at rest. I just bent the rusty pins to the 90degree position and all is well.
The brake cables must be loosened to remove the rear rotor and that is done at the center console.

Klaus
--
The 164 has a new home, all I am left with are a 95 854T and a 98 V70R :)

This post has been marked as an answer to the original question.

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Brake Scrape While Turning [V70-XC70][1999]
posted by  Goatman  on Sun Feb 3 19:51 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.