Volvo AWD S40-V40 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2010 S40-V40 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Volvo S40 code P1618 S40-V40

I keep getting close to getting all of the codes addressed. Then a new one pops up. I have no idea what is this one P1618 and if it is something I should be messing with.

Any ideas?
Thanks!
Gary








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Volvo S40 code P1618 S40-V40

    This is a fun code. You have an emissions related code stored in your transmission module. What that code is, I don't know. Here's the thing, looking through the codes that show up for tansmission (solenoid/oil temp...) none make sense to throw an emission code.

    However, I could be misunderstanding what it means, and it could just mean your transmission is throwing a code. Your turbo control is disabled while the fault is there.

    I think you have to go to a dealer/volvo shop to read tranny codes, but i'm 100% on that. What color is your fluid? If its not nice and red, flush it. It could be a warning sign that you're low on fluid, or that you're getting a solenoid to stick every now and then. Fresh fluid should clean it enough and make it go away. Your fluid should never look like used motor oil, if it does flush asap.
    --
    If you're not driving it "like its stolen," are you really driving?







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.