Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2014 V70-XC70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

half axle came apart V70-XC70 2007

In the process of replacing ball joint on drivers side, the axle would not go in enough, so I pulled back the inner boot. The axle with the three big rollers had come out of the box they fit into. It does not look like anything holds the two parts together. Do I just push it back in or get a new half axle?.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

half axle came apart V70-XC70 2007

If they just slid out I would just slide them back in. I would also reassure myself that there wasn't a groove for circlips that had not been installed by the builder.

To answer your other question - I can't see your axle, but there is probably a clip on the end of the splines that has to compress and pop into a groove in the transaxle.

Greg







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.