Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2022 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

camshaft position sensor voltage supply V70-XC70 2004

posted by  jimnash53 on  Mon Feb 26 21:45 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 2 07:25 CST 2009
[RELATED]

I have a 2004 turbo charged XC70 that won't start. The scanner said crankshaft and camshaft position sensors. The manual said to check that the cmp is getting battery voltage on the end wire. I don't get battery voltage, I've checked a half a dozen times and variously get about 5 volts or no volts. This is with the key on and sensor disconnected, as measured by touching the wiring harness connector pin with the volt meter lead; and negative side of volt meter grounded. I get continuity from the connector pin to the corresponding computer pin. Any ideas as to why I'm not getting battery voltage where I should? thanks for any help and ideas. Jim






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New camshaft position sensor voltage supply [V70-XC70][2004]
posted by  jimnash53  on Mon Feb 26 21:45 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.