Volvo AWD 400 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2016 400 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Reading the codes... 400

posted by  someone claiming to be Zig on  Sat Jan 24 05:46 CST 2004 [RELATED]

Hi all.

I apologise for this post as I am sure that is has been covered before, but sadly I cant find it.

I was wandering how do you read the fault codes in the 440GL 1.8 Single point injection...

I have found the little box with the wire and the little red LED... just wandering what to do to pull a code.

Thanks in advance - and sorry if im asking you to repeat yourselves..

Goodwill!

Ziggy.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Reading the codes... 400

posted by  arno on  Sun Jan 25 08:18 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Dec 8 01:10 CST 2000
[RELATED]

Insert plug of short lead into hole labeled '2'
Turn on ignition, but do not start car
Press button on diag box next to LED about 0.5 seconds
Write down blink-sequence

Codes are 3 digit blink sequences with a longer pause between each digit.

So: 2.1.2 would be blink-blink-pause-blink-pause-blink-blink

If it returns 1.1.1 then all is OK and no error codes were logged.

Bye, Arno.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Reading the codes... 400

posted by  someone claiming to be Zig on  Sun Jan 25 08:47 CST 2004 [RELATED]

Thanks to you Arno for your help.

Goodwill,

Ziggy.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.