Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

wiper arm appears not to be bent but is running in wrong plane, not loose on shaft 850 1997

posted by  gypsycatfish on  Sun Jan 15 11:13 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I searched but did not find the exact problem. The wiper arm on drivers side leaves the surface of windshield half way cross the wipe. This has gradually gotten worse so I am guessing wear or something is coming loose. Shaft nut is tight. Wiper is free. It appears that the shaft is not in the correct plane in relationship with the windshield. Is there an adjustment on the shaft mounting? I have not pulled the cover yet. I am aware that many people have the nut holding the arm on come lose and the arm flops around or gets out of time, this is a different proplem. Any advice or links would be helpful.
thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New wiper arm appears not to be bent but is running in wrong plane, not loose on shaft [850][1997]
posted by  gypsycatfish  on Sun Jan 15 11:13 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.