Volvo AWD S70 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2010 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

That plastic disc on fuel injector ends: is it necessary? S70 1998

posted by  dick on  Thu Mar 1 15:16 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 3 15:24 CST 2014
[RELATED]

The small plastic disc on the end of my fuel injectors has broken on a couple. Had the injectors cleaned by RC Engineering and they did not replace them. Am assuming they are not really necessary, but would appreciate input from some knowledgeable soul.

BTW, the flow after RC's work is nearly equal so it sounds as if it will be worth it. Just have to finish some more reassembly work to try it out. Significant change from pre cleaning.

dick






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED That plastic disc on fuel injector ends: is it necessary? [S70][1998]
posted by  dick  on Thu Mar 1 15:16 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.