Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2002 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Timing belt replacement _ I'm half a tooth off Help please 850

posted by  paulfr on  Wed Oct 17 08:09 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun May 20 05:55 CST 2012
[RELATED]

It's all to the good.

I finally set up the alignment 1/2 tooth off CCW (or less) on the crank and "turned" the belt CW onto the intake sprocket while rotating the crank shaft 1/2 tooth back. This kept the right side belt VERY tight as I threaded the left side over, around and up on to the exhaust sprocket. Hand-cranked it DOZENS of times to be SURE nothing knocking. Put it all back together and I'm cruising down the highway of life.

Do not attempt w/o removing the plugs 1st. Anything else is crazy. I didn't need a cam "keeper inplace" tool. Cams are not that "loose" and you can set the alignment up using #1 piston @TDC and the crank pulley mark if it really gets off the mark.

Thanks to ALL who provided advice and assistance. These forums are GREAT. I like doing my own work but before forums I never had a place to go for help.

Nxt - front struts & CV's

paulfr






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing belt replacement _ I'm half a tooth off Help please [850]
posted by  paulfr  on Tue Oct 9 10:41 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.