Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

If you get a P0014...

posted by  KlausC on  Tue May 4 14:15 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

and your car is a 1998+ with the new style manual tensioner, CHECK the tensioner!!!

Two Brickboarders found this out. One adjusted the tensioner, the other is looking for a new car.

It is possible for the crank position sensor to be ahead of the cam position sensor during spirited driving (heavey torque) due to the belt not being tensioned properly. If this continues, the belt can slip a few teeth and pistons and valves will clash!

Klaus
--
Cynthia Amendt, RIP






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New If you get a P0014...
posted by  KlausC subscriber  on Tue May 4 14:15 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.