Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

850 wheel bolts 850

posted by  B.B. on  Tue Aug 17 12:19 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 6 13:15 CST 2014
[RELATED]

I just got some new front tires and went for alignment and was told that
the left ball joint was toast. OK, then I had to take a 24" breaker bar with
a 2' pipe on it to get the bolts loose. ( Arrrgh, I gotta go back to the tire
guy,and tell him about the torque gizmo's for installing wheels.)
Anyway I'm waiting for the control arm to show up and decided to wire brush the wheel bolts, and they are all nasty showing that they get beatup with their contact on the mag rims. I can chuck them in a little bench lathe here and clean em up with a file, but the tilt light went off since my pal's 850 had
frozen wheel bolts too and he was using a dinky harbor freight electric
impact wrench. Is this common with the steel bolts and mag rims?
Whats going on? will a decent dressing of the wheel bolts and some never seez
take care of this issue?

Thanks, Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 850 wheel bolts [850]
posted by  B.B. subscriber  on Tue Aug 17 12:19 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.