Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Vibration from A/C Blower Motor??? cont'd 850 1993

posted by  someone claiming to be abe crombie on  Fri Sep 4 14:24 CST 1998 [RELATED]

I believe that your front mount (Under crank pulley) is likely the culprit as they do fail in time.

You can support engine by placing a block under the front end adjacent to oil filter and then lifting. You do not want to lift excessively and you certainly do not want to lift 6 or more inches back from crank end of pan as that is where it is an unsupported aluminum thin casting. You will only need lift it enough to ease weight off the mouint so bolts come out without stress.

On a car with good mounts the rubber bumper on left underside of transmission will have only 1/2 " clearance.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.