Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2013 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cannot clear codes; why? 850 1994

posted by  cleeland on  Tue Feb 5 13:04 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi,

Model is 1994 855T. Over the weekend it threw codes 443, 435, and 232. I found that one of the ports on the vacuum tee was sitting wide open with no cap, so I put a cap on it and tried to clear codes per instructions in Haynes and Alldata (after reading codes, ignition off/on, hold button on A for 5 sec, wait for LED on, hold for 5 sec, LED should go off) but the codes wouldn't clear. I had a devil of a time actually getting the first 5 sec delay to actually "take"; often the LED wouldn't do anything. Then, when I would get it to "take", instead of the LED going off the second time, it would just flash at a constant rate.

What gives? Anybody know? Alldata provides more info than Haynes, but less than the volvo service manual would, I expect. Anybody have one handy?

Thanks!
-cj






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cannot clear codes; why? [850][1994]
posted by  cleeland  on Tue Feb 5 13:04 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.