Volvo AWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2007

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

rising rate fuel regulator - how do i fit it and what about the oem one already fitted?

posted by  someone claiming to be duncan on  Sat Mar 23 07:37 CST 2002 [RELATED]

i got a rising rate fuel regulator as part of a bsr stage 3 upgrade

there appears to be one fitted by volvo under the aluminium cover for the injectors on the fuel return line- a small module attached to the rear of the fuel bar with a pressure connection to the intake manifold

how and where do i fit the regulator - if i remove the volvo one, it seems to bolt straight on to the fuel rail rather than be connected via a hose and there would be a opening to the air for fuel to escape

anyone done this before or had it done eg by bsr etc

the one supplied is malpassi rising rate x1.2 i am told

thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New rising rate fuel regulator - how do i fit it and what about the oem one already fitted?
posted by  someone claiming to be duncan  on Sat Mar 23 07:37 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.