Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2003 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I could use some instruction... 850

posted by  RarityBoiAtl on  Tue May 21 19:10 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jan 19 07:12 CST 2008
[RELATED]

I'm picking up my head finally tomorrow and taking it to get new valve seals installed. Then I'll be close to being back on the road!

I have no problems with tearing my car apart and really know my way around quite well. I rather enjoy getting to know my cars inside and out. You guys have helped a lot so far!!!! Thank You! Volvo is still new ground for me.

Ok now what I need some help with...

I need better instruction on re-installing the cam sprockets so that the timing marks are lined up correctly. I've read it a few times in the haynes manual but can't make much sence of it. I just searched the archives but couldn't find anything of use. What I need is a good basic breakdown of the procedure from those of you that have done it.

Thanks in advance
-J
--
'94 855 5spd 'Drew' 203,000 Miles *** Never assume that your factory timing marks are correct UNLESS you know for a fact WHO has been in there and WHAT they have done!! ASK ME HOW I KNOW!!! ***






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New I could use some instruction... [850]
posted by  RarityBoiAtl  on Tue May 21 19:10 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.