Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2001 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Pick-up O-ring Replacement 850 1993

posted by  Phantom on  Sun Aug 4 09:38 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 5 18:49 CST 2014
[RELATED]

Does anyone that has done the oil pick-up o-ring replacement have any tips to pass along on how difficult this job is? I have looked through old posts trying to find some specific information, and still have some doubts. Is it correct that the subframe needs to be dropped to get the oil pan out. How is the engine supported during this process? Are there more o-rings to replace other than the oil tube pick-up and oil pump? I have an intermittent valve tapping that I would like to cure, but am not sure if I should undertake this job myself, or take it to a shop to have done.

Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Pick-up O-ring Replacement [850][1993]
posted by  Phantom  on Sun Aug 4 09:38 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.