Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Upper torque bushing. 850 1996

posted by  JimH on  Sun Apr 4 03:37 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Need some help again guys. My UTB is completely gone - I have a replacement, but the problem I have is removing the old one - it looks like it's baked on & I've been having to use a chisel to remove it. The inside of it is virtually all gone, just the outer ring that won't budge. Will a wire wheel do it? Any other ideas?

As far as replacing, while searching the archives, I see lots of different ideas. Am I going to have to remove that whole bracket? If so, how difficult is that?

Also, does the arrow on the new one point up or forward or ?

Sorry for the rookie questions, but I know lots of you have done this already.

Thanks as usual.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Upper torque bushing. [850][1996]
posted by  JimH subscriber  on Sun Apr 4 03:37 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.