Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Antena mast removal 850

posted by  KlausC on  Fri Jul 2 06:34 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

Both my 850 and 780 have a problem extending the antena mast. They only come up to the first position. I thought I would buy a new mast, but I couldn't get the old mast out of my 850 (the 780 is still in the shop). I am afraid to pull too hard and break something. When I removed the whole antena, I could pull the mast out to the first position and the motor turned slowly (not plugged in). Should I keep pulling really hard? Why can't I use pliers to pull out the other sections, or does the plastic gear hold them in?

If I can get the mast out, should I try to clean the motor housing with very hot water or carb cleaner? It would be neat to "fix" something rather than "replacing" it. The antenae are not bent, as far as I can tell, but very dirty.

Thank you,

Klaus
--
95 854T, 88 780, 88 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Antena mast removal [850]
posted by  KlausC subscriber  on Fri Jul 2 06:34 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.