The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ABS controller V70-XC70

posted by  someone claiming to be steve@cbe on  Tue Sep 13 21:11 CST 2005 [RELATED]

ok, to open the best way is to use a tool like a dremel with a small diameter thin cut off wheel and cut the "seam" around the module with the tool making sure to not go into the module any deeper than about 5-6mm this way you wont contact the insides. you need to re-solder the pins for the big multiplug and the two pins for the pump motor plug. some of these wires are small so you need to take care. when you reassemble it use black RTV silicone or simaler so its waterproof.
as for the diagnosis it depends on if its a old or new shape v70, the older type uses volvos VST the newer v70 uses vadis/vida. a aftermarket scan tool may work although i have not used these. good luck, not many people know about this although a lot have had this problem and are charged a lot of money for what is a fairly basic re-soldering job.
steve.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.