The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Passenger front abs sensor 850

What is the year of your 850?
Did the ABS light turned ON right after the LCA was replaced?
If so.
Take a DVOM and check the resistance of the wheel speed sensor (with the wires disconnected). The resistance should be 1,140 ohms.
If this checks OK, turn the DVOM to read AC voltage, connect to the sensor terminals and rotate the axle, the sensor should generate an AC sinewave voltage that shuld be 2-5 volts (not 100% sure). Just make sure it generates a signal.
Lastly, with the sensor connected and the ABS unit disconnected. Read the resistance on the ABS connector (not the ABS unit) between terminals #3 and #18. The resistance should be 1,140 ohms.

And for the copy-cats, I know you don't have a Volvo to test your ABS units.
So now you know a little more about how to test Volvo ABS systems.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.