The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

CEL - P0116 S70 1998

You have a faulty ECT sensor. I have had that happen to me once when using an off brand ECT. I never had any of the other ones I have installed give me any problems but I now only install factory Volvo ones. When the ECT takes a crap the F.I. ECU will run the cooling fan at half speed continuously to prevent an overheat situation, it is part of the default programming for this fault. The 9186486 ECT shows that it is applicable to the 960, 850, and all of the S/V/C and XC70 models.

The one that I had came in with the typical ect code and green crap leaking out of the front of the sensor. I replaced the sensor only to have the light come on the next day. When looking at it the next day I could make the fan come on and off by wiggling the connection right at the sensor, an ohm meter showed that it was going open when wiggled, I replaced it with a factory one and all is good again.

Mark






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.