The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

replacing hoses on flame trap housing S70 1998

posted by  mbarron on  Sat Jul 8 07:39 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Nov 20 23:26 CST 2012
[RELATED]

I now have approximately 2x oil loss, say 1 qt in 1000 miles.
Prior to cleaning out the flame trap area I had 10x oil loss.

On the flame trap holder there are three hoses
- 1 to the idle air pump
- 2 small vacuum house
- 3 larger tube
hoses 2 and three appear to run down under the intake
manifold. Does the bigger one go to the Oil Separator?
I have read the smaller hose goes to a nipple on the
intake manifold. Mine is limp or flaccid, and needs replacing
I believe

q: do I need to remove the manifold to replace the vacuum hose(2)
and to check if nipple is clear?
Thanks, Mark






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.