The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Trailer wiring installation question 850

You might consider getting a wiring harness from the dealer. More costly, but probably easy to install and you won't have problems with the bulb-out indicator lighting up.

I need to disagree with the comment about the 850 being a poor choice for towing. An auxiliary ATF cooler is always a good idea (along with regular ATF flushes), and you should avoid towing any significant load in 4th (frequent shifting back to third is the worst thing that you can do). It seems to be the heat, not the load that causes problems. However, towing is not an afterthought for Volvo. I've had more than 3,000 lbs behind my S60 and it handled it very well. A thousand pound trailer that is well-balanced is hardly noticeable. The S60 has independent rear suspension and a wider rear track, but I would expect the 850 to do fine as well if a little thought is put into hitch setup and the load being towed.

Check out http://www.theautochannel.com/news/2006/02/27/211961.html






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.