The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

In trouble after replacing plugs V70-XC70

I replaced the plugs in the 2000 V70XC with the standard Bosch copper ones from IPD.

When I first got the cover off, I noticed there was a little oil in the head area so I cleaned up with a little degreaser and water. Other than that, everything went smoothly.

I started up fine but after about a minute I noticed that the engine started to miss and run rough. It's continued to do so and the Check Engine light came on as well. I suspect the missing plug is causing too much gas to enter the catalytic converter so I shut off the engine.

I checked my work and everything seems fine. I don't know how to tell which cylinder is not firing? I have a volt meter and a timing light but I'm not sure where to hook it up.

Any suggestions on how to test the ignition system?

Thanks,

RGW






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.