The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fender Problem 850 1997

My experience knocking dents out of the 850 fender has been mixed. As Klaus said, metal on metal is a definite no-no.

The only trouble I have had is the contour of the fender is hard to recover if it has been affected. For example, after correcting a large dent my driver's fender and fender liner were scraping the outside of my tire. Try as I might I couldn't modify it enough to be correct. I finally gave up (decided a new fender was needed) and just grabbed it and yanked up. Not the best body work.

To answer one of your questions, in my experience making corrections with the fender on the car, depending on what is needed, is very difficult. You don't have any room to swing your hammer!

I must have been very lucky - I found a painted (my color) used passenger fender in good shape on ebay for cheap. Sadly, that is now my good fender, since the driver's side was hit shortly thereafter...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.