The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

intake gaskets 850

Well the local Volvo dealer does not stock it, and it takes a week to get it...that won't work for this weekend.

Now for the truth: I cleaned the oil trap about 2 weeks ago, but apparently is wrestling the intake back in, managed to knock one of the hoses back off. I have an awful oil leak from right there now. So I am re-doing the job. Really did not want to admit I screwed up, but I did. The reason I am admitting it is, that I already have an aftermarket gasket on it from that time. The original gasket was not a thin paper gasket like you have, but wasn't as thick as this one either. Regardless, I'm going back with this gasket since the dealer does not have one in stock. If there was something really wrong with the thick composition gasket, I'd wait until they restocked.

Now as to the fuel injectors: What did you do, disconnect the fuel line at the fuel rail? Is that just a common banjo fitting?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.