The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Ignition problems - key turns hard S60 2004

The cable is there to lock the key in so you cannot remove it when the gear selector is not in P. Just put a drop of oil or liquid graphite, no WD40, on the cable end to help it out.

Your problem sounds like it is more on the other side of the steering column. The electrical portion of the switch. Remove it and then wiggle the key portion around. The key should move freely, if not then oil fron the drivers side of the column.

The ignition switch can be rotated with a screwdriver. If the battery is connected, you will be able to start the car. But just check the movement to posII. A little blast of dielectric grease should help.

The key portion of the switch cannot be removed. It is installed with two hardened steel break off bolts. The bolts need to be drilled out to remove the switch, which you don't want to do.

Klaus
--
Just driving a 1998 V70R :)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.