The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

busted antenna S40-V40

Since the entire unit is out of the car, making it harder to work on, place the motor on a workbench with a vise to hold it down. Extend the antenna as far as it will go.
Take a pair of conventional pliers and place it just under the antenna tip. Tap the pliers with a hammer. The sleeve will then slowly come out of the base.

It is usually corrosion around the sleeve that causes the antenna to stop retracting. Take note when you pull the plastic cable out of the motor housing, the grooves must go in on the same side with the new antenna.

BTW, mount the antenna motor back in the car before putting on the new antenna. Have the radio on, so that when you get the white plastic started, all you have to do is turn the radio off to draw it down. A helper is nice to have.

Klaus
--
Volvoless. Sold the R. There is now a void...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.