The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Interior door panel replacement options S70 1998

I did my wife's '98 S70 over 4 years ago and they still look great. I took all 4 panels off, heated the inner trim perimeter with a heat gun and removed the cardboard center sections. I used a 3M "Clean & Strip" brush, on a slow speed die grinder, to clean off all glue from cardboard. I went to an upholstry shop, bought a couple yards of a very heavy tweed cloth (it stretches). I also bought a pint of upholstry glue from him (apply it like contact cement). One at a time, I coated inside cloth and cardboard, left it sit 5-10 minutes, then glued material to cardboard, carefully stretching material into pocket curves. Trimmed excess after dry, trimmed switch openings, etc. I used a Lord Fusor 2 part adhesive to glue center cardboard panels to trim panels, clamped and allowed to cure. I spent less than $50.00 on materials and about 4 hours of my time. Every time I get in her car I think how "factory" the inserts look!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.