The message to which you are about to reply is shown first. GO TO REPLY FORM
posted by
someone claiming to be fixit2002
on
Fri Mar 20 03:22 CST 2009 [ RELATED]
|
|
You may have a leaky intake manifold gasket. Also try cleaning the MAS and check the intake bellows for leaks. If the mechanic replaced the camm sensor for this problem get your money back. It will only cause a no start problem. Once the engine starts it's out of the picture. One other thing is the air intake temp sensor. When it's bad it doesn't close and the engine is always sucking in heated air. This very well could be your problem. Take the sensor out and let it sit at room temp. If it's bad the rod will only be sticking out about a 1/4 inch. Should be about 9/16 inch long. You can always jam the air intake so that it's never using heated air.
|
|
* = Field is optional.
+ = Enter space delimited labels for this post. An example entry: 240 muffler
©Jarrod Stenberg 1997-2022. All material except where indicated.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.