The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Check engine light V70-XC70 1999

posted by  KlausC on  Mon Jun 22 14:13 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

When you remove the intake manifold, note the position of both knock sensors. The new ones must have the wires coming out in the identical directions as the old ones.

You do not need to remove the injector rail from the manifold. I suggest keeping the injectors in place, just loosen the fuel lines at the top and backside of the block. Then flip the manifold up, out of the way. Should save you at least an hour of additional work.

Also, when you remove the bolt for the dipstick on the manifold, remove the bolt for the manifold bracket which is right next to it. When reinstalling, do not tighten down the manifold bracket bottom bolt until the top bolt has been secured.

Klaus
--
Common sense trumps a PhD






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.