The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

PCV Turbo V70-XC70

posted by  KlausC on  Wed Sep 2 08:48 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

Only 2 hoses connect to the oil separator, one from the valve cover and the other from the air intake. It makes sense when you pull off the manifold.
Remember, you do not need to pull off the injectors, just loosen the fuel line and disconnect the vacuum line for the fuel pressure regulator(hard line), then rest the manifold on top of the engine.

Remove the bolt for the dipstick and the manifold support bracket at the same time. When reassembling, finger tighten the bottom bracket bolt, put the manifold back into position, and then install the top bracket bolt before tightening the bottom bolt.

Clean out the PCT before attaching the nice clean tubing at the air intake.

Klaus
--
The more I learn, the more I forget. So why learn?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.