The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

cabin filter 1993 850 850

posted by  someone claiming to be dnlars on  Sun Oct 4 06:22 CST 2009 [RELATED]

Klaus - On all 1993 and some 1994 850's, w/ECC, the temp. sensor is mounted on top of the original air guide by two very small "star" screws. This applied to 850's before chassis # 131217 (4 door) and 037306 (5door). This requires an new mount inside the filter holder. The part numbers are: Bracket 6849320-4, Screw 979186-4 and washer 960138-6. About $6 bucks for all of them from Volvo, and no kiss after you pay. You'll need to drill a 1/8 inch hole in the filter holder for the bracket and then secure the excess sensor wire with a plastic tie. The sensor then sits about in the middle of the opening and below the filter. Glad I checked before taking the cowl off and found this was needed.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.