|
I found this criptic on IPD's web site:
If your Volvo is pre-wired you’ll be able to see the black plastic loom running alongside the inner body. Two wires are wrapped in the plastic loom and are about the diameter of a pencil. The wire comes up from the front of the car and passes the hole in the fender to a rubber grommet in the body where it is plugged into for storage. The grommet is located about 3 inches to the right of the opening in the driver side fender and up about one inch. Use a flashlight if it is not readily visible. You will not be able to reach it, however the plug can easily be removed from the grommet by gently pulling on the wire. Use a coat hanger to fish the wire out through the hole in the fender. Make a hook on one end small enough to fit through the fender hole and large enough to hook the wire. Use the tool to catch the wire and pull it through the hole in the fender. Plug the wire into the lamp and snap the lamp into the fender.
The lamp will only go in one way (small end toward the front of the car). Pre- wired cars will flash in sync with the turn signals whenever the turn signal or emergency flashers are activated.
Call them just after 10am Pacific time zone, and they will be glad to help you. Really nice guys!
Klaus
--
Proud owner of a 220S. If I had more room, I would have more Volvos.
|
