The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fixed! (Kinda) S70 1998

I still don't like the 'shrink-shrink' noise. Something is unbalanced or not aligned properly.

When replacing the brake shoes, first loosen the Ebrake cable at the handle a lot. Adjustment screw is in the center console, hidden by a trap door in the bottom of the storage area and accessible with a flat screwdriver.

The rear shoes are held up with 2 metal tabs, probably a little rusty. These tabs must be at 90 degrees and are easily bent when someone tries to take off the rotors. Use brake grease on any moving part, including the springs.
The star wheel adjuster must be adjusted before tightening the Ebrake cable.

Clean off the hubs with a wire brush before putting the rotor back on. I use a little silicone brake grease to help keep the rust from forming too soon.

Klaus
--
Praying for Cynthia Amendt, heaven bound






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.