The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Spring Removal S70 1998

I'm gonna visit the donor s70 at the PnP tomorrow and get the rear springs.
If I am *really* gung-ho I might get the front's too. In either case, I think I should at least pull the passenger side springs, but a pair might be a good idea.

Thing is... I'm not quite sure how to do it, so I'm gonna bring a set of spring compressors and a full socket set. I've only removed springs from the 120-series before. For the old ones, you just remove the limited straps, jack up the frame and lower the rear axle. This lets the springs fall out.

I'm guessing to remove the springs from a wheel-less s70 on a rack, I will need to:

1- compress the springs
2- remove the shock absorber
3- remove the lower spring retainer
4- remove spring and release compressors.

If I can just knock off the absorber and stand back, it would make the whole process faster - although not especially safer...

Any Advice here?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.