The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Vacuum line diagram? Routing? Under manifold? Turbo. 850 1995

posted by  Erwin on  Sun Apr 4 09:16 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:39 CST 2014
[RELATED]

I have an on-going 2-3-1, 2-3-2 CEL and a very rough idle when cold. Idles better warm but not perfectly.

I've replaced the vacuum tree which was worn through, a few rotted elbows and even found some of the rigid plastic vacuum line had disintegrated in places, which I replaced with rubber vacuum hose. Everything was fine, then this latest situation.

Where does the elbow under the intake manifold feed? The elbow is good but I don't know where the other end goes.

Another point, on the air ducting downstream of the MAF, just before the turbo there is what looks like a PCV type valve with a vacuum line coming in from the side. Is this what ends up going to the elbow under the intake manifold, near the PS pump mentioned above?

Back near the turbo, there is a vac line on the WG actuator of course, but in that general area is one more device with a vac line that looks like it goes up to the vac tree near the throttle bellcrank. What is that device? The hose had slipped off off the nipple and I found it had been repaired before by splicing two together. (Had the car since 2000 and it wasn't me!)

Big question is, can anyone point me to a comprehensive 850T vac diagram? That would surely help knock this project out.

Thanks,

Erwin
'95 855T 155k
'94 945T 132k





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.