The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Code won't clear 850 95

posted by  someone claiming to be Robert A. Froebel on  Wed Nov 1 12:17 CST 2000 [RELATED]

Hi Folks;

The published times to hold the button push for code clearing are somewhat in error. Note also: "DTC's can be erased only when all have been displayed and the first DTC has been repeated at least once."

This works most of the time for me; sometimes I have to do it twice.

1. Push and hold the test button for 20 seconds and release.

2. About 5 seconds after release an acknowledging light will come on.

3. While the light is still on, press and hold the test button for 20 seconds and release.

4. The acknowledge light will come on again. Wait 2 or 3 seconds.

5. Press test button for 1 second and release.

6. If you were successful you will get the 1-1-1 code.

7. Turn the ignition off.

8. Start engine; MIL should be off.

This is my slight modification of the procedure on page 52 of TP 2301202.

Robert A. Froebel





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.