The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine codes 850

Reading the codes is fairly straightforward. Find the diagnostic sockets at the front right hand side of the engine compartment. Remove cover from the sockets marked A and insert the wire into socket 2. Turn the ignition to on. With pen and paper ready, press the button by A once for more than 1 second and less than 3 seconds. The red light will flash the code, watch it and count the number of flashes in a 3 flash series. Press the button again, and read the second code. Repeat a third time. The system stores only three codes. It will repeat the sequence if you missed or are unsure about the codes you read the first time through.

To clear the codes, push and hold the button down for 5 seconds. The LED will come on. Push and hold the button for another 5 seconds. The light should go out and the codes are cleared.

To interpret the codes see:
http://scandcar.com/en/volvo-850-s70-v70-mainmenu-16/volvo-850-foutcodes-mainmenu-18.html






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.