The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Seat removal for seatbelt replacement S40-V40

Just to close the loop on this one. The driver seat buckle was an easy replacement. The buckle requires a T-50 (I believe) socket. Although Haynes suggested the plastic covers over the bolts securing the seat rails to the floor would be very difficult to remove without breaking, I found this not to be the case. Carefully tease the plastic covers forward for the front bolts and backward for the rear bolts moving the electric seat in opposite directions for easy access. Do be aware at least on the drivers right front cover there is a small dimple that must be depressed do allow removal. Also, a small flat-headed screwdriver is needed to gently press the retainer sideways to allow removal of the electrical plug under the seat. My daughter is happy and so am I.
--
Steven 04 C70 HPT, 04 V70 2.5T Titanium, 06 S40 2.4i






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.