The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

heater core 850 1997

posted by  someone claiming to be gwen on  Sat Oct 22 13:44 CST 2011 [RELATED]

All you really need is a couple torx screw drivers and some patience.

Remove the drivers and passenger side kick panels. 6 screws.

loosen the carpet on both sides of the center consol and remove the two screws holding the black plastic guards in place.

loosen the one screw holding the heater core pipe to the core from the firewall. the screw faces you and is right in between the pipes.

take out the 4 screws that hold the heater core in the air duct system. Pull the unit all the way down to the floor and remove from the car without wrecking the pipes or firewall connector. They say the passenger side is easier.

I had the unit out in like 30 minutes, but wrecked the firewall connector.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.