The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

PITA C70 1998

Got it eventually. there wasn't really any crud in there, but I did clean it.
The O-ring was just being a pita. I think it swelled slightly.

I could slide the fitting in w/o the ring easily, and could fit the ring inside easily, but even with the o-ring installed into the solenoid housing, I still couldn't get the fitting to slide smoothly against the ring.

after some more lube, and finally getting the retainer plate in place, it finally seated itself.

Mr. 10mm was a nightmare - No amount of extensions or knuckles was quite adequate to get it to seat itself. There's just too much in the way. I finally got it started and eventually realized that it had cross-threaded...

Oh well. Have to take care of that later...

Took so long, I've postponed my planned T-Belt replacement again. It's got at least another 15-20k on it, so it's not critical today...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.