The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

just fixed my ABS light issue V70-XC70 1998

posted by  RobCooper on  Tue May 29 23:01 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 13 17:31 CST 2014
[RELATED]

This is my 2nd successful fix, 1st was on a 96 850, same as 98 V70
The two 12v supply solder joints on the circuit board in the ABS control box needed to be resoldered. Also a corner joint off the multi pin conector was cracked too. Use good light and mag glass

You have to remove the box, crack it open and look at the joints....you will see a crack. Silicon the box back up and reconnect.

Always disconnect battery, remove air box 1st for access. Little torx driver needed or small hex drive worked to. Careful not to slice you hands when breaking the rim/lip of the box off

Rob






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.