The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Stretchable CV boot V70-XC70 1998

old post but wanted to add.

I was very pleased with using the Dorman Uniboot (614-004) from Autozone.($20)

CV joint still good. No need to pull the axle of car.

Instead of buying the Dorman cone or air tool.....

I bought a large tranny funnel which I trim 2 inches off the wide cone end, and slotted the perimeter to allow the end to flex down as the boot slips past.

Lubed up the funnel with olive oil and coated the inverted boot....

Slide the boot down over the funnel so the wide end of boot overhangs the funnel end...so as to grab it as you push it off the funnel...

Put the wide end of the funnel with boot over the drive axle CV.....and pushed.

All on, re greased and clamped and trim excess boot away. Reinstall spindle and torsion rod nut and lower control arm bolt.

Happy






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.