The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ecc code 1-4-5 850 1995

The 411 and 414 are blower related, so I suggest fixing/replacing that first as it is easy to do after removing the glove box and kick panel. The 414 is for the temp sensor in the intake, but just that no air is being drawn past it - I think.

The other damper errors will take considerable more work, as they are hard to get to and need to fixed all at the same time. These errors are NOT dead motors, but dampers out of position.

My 1996 had all 4 dampers giving codes! It wasn't resolved until I took them all off, took the motor apart to position the gears at the center of movement, and put the motor back on the console with the damper in the middle position. A real chore, as then I was finally able to run the reset program (444,999).

Check the defrost damper on the passenger side and make sure the plastic shaft is not cracked. That one tends to do that.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.